Category
Recessed
Application
Clean&Medical
Luminaire luminous flux [lm]
3438/922/731
Luminaire's light efficiency [lm/W]
95/68,3/84
Power of luminaire [W]
36,2/13,5/8,7
Colour of the light [K]
4000
CRI
>80
Diffuser
MICRO-PRM PLX (microprismatic diffuser PMMA and PMMA-opal)
Beam
wideflood - 90° ÷ 120°
Driver
standard on/off (E)
Light distribution
Direct-indirect (up&down)
Colour
RAL 9003 (white)
Dimensions [mm]
595 x 595 x 130
Light source
LED
Lifetime of LED sources [h]
60000
Lx/By
L80/B10
SDCM (LED sources)
3
Photobiological risk class (IEC/EN 62471)
RG0
Luminous flux LED [lm]
5199/2197/961
Luminous efficiency of sources [lm/W]
161/183,1/139,3
Protection degree
IP20/40
LED power [W]
32,3/12/6,9
Voltage
220..240 V, 50..60 Hz
Protection against electric shock
I
Circuit load capacity
7 (B10), 11 (B16), 11 (C10), 18 (C16)
Assembly
mounted in module ceilings
Material
steel sheet
Impact resistant
IK04
Operating temperature range [°C]
5 ÷ 35
Beam angle [°]
92/143+120/20
EAN
5902107376604
Weight [kg]
5.8

AGAT CLINIC LED 5000/2200/5X1,7W MICRO-PRM PLX E 63 4000K / M600 THREE CIRCUITS

Indoor luminaire. Assembly: mounted in module ceilings. The body material is steel sheet. Colour - RAL 9003 (white). Luminaire dimensions: 595 x 595 x 130 mm. Weight 5,8 kg. Diffuser: MICRO-PRM PLX (micro-prismatic diffuser PMMA and PMMA opal). Beam angle: 92/143+120/20. Light source type: LED. Colour of the light 4000 K. SDCM=3. CRI>80. Lifetime of LED sources: 60000 h L80/B10. Luminaire luminous flux: 3438/922/731 lm. Power of luminaire: 36,2/13,5/8,7 W. Luminaire's light efficiency: 95/68,3/84 lm/W. Driver: standard on/off (E). Voltage 220..240 V, 50..60 Hz. Circuit load capacity: 7 (B10), 11 (B16), 11 (C10), 18 (C16). Operating temperature range: 5 ÷ 35° C. Protection degree: IP20/40. Impact resistant: IK04. Protection against electric shock: I. Photobiological risk class (IEC/EN 62471): RG0.
CE
LED
E
kl.I
IP20-40
IK04
indoor
nie_dom
cri-v80
electronic-equipment
supply-voltage
SDCM-3
lifetime-60000-L80-B10

Downloads

Any questions? Send us a message

Contact us