Category
Recessed
Application
Clean&Medical
Luminaire luminous flux [lm]
3514
Luminaire's light efficiency [lm/W]
144
Power of luminaire [W]
24.4
Colour of the light [K]
4000
CRI
>80
Diffuser
SH (transparent hardened glass)
Beam
asymmetric
Driver
standard on/off (E)
Light distribution
Direct (l-down)
Colour
RAL 9016 (white)
Dimensions [mm]
595 x 595 x 35
Light source
LED
Lifetime of LED sources [h]
100000
Lx/By
L80/B10
SDCM (LED sources)
3
Photobiological risk class (IEC/EN 62471)
RG0
Luminous flux LED [lm]
4675
Luminous efficiency of sources [lm/W]
214.4
Protection degree
IP65
LED power [W]
21.8
Voltage
220..240 V, 50..60 Hz
Protection against electric shock
I
Circuit load capacity
25 (B10), 40 (B16), 39 (C10), 62 (C16)
Power factor cos φ
>0,95
Assembly
mounted in module ceilings
Material
steel sheet
Impact resistant
IK08
Operating temperature range [°C]
5 ÷ 30
Beam angle [°]
(C0-C180) / (C90-C270) - 79° / 46°
Dimensions of M625 module [mm]
621 x 621 x 35
EAN
5902107153106

AGAT CLEAN SLIGHT LED 4400 OPTICS-3L SH IP65 E 34 840 / 600X600

Indoor luminaire. Assembly: mounted in module ceilings. The body material is steel sheet. Colour - RAL 9016 (white). Dimensions: 595 x 595 x 35 mm. Diffuser: SH (transparent hardened glass). The efficiency of the optical system is 75,16%. Beam angle: (C0-C180) / (C90-C270) - 79° / 46°. Light source type: LED. Colour of the light 4000 K. SDCM=3. CRI>80. Lifetime of LED sources: 100000 h L80/B10. Luminaire luminous flux: 3514 lm. Power of luminaire: 24,4 W. Luminaire's light efficiency: 144 lm/W. Driver: standard on/off (E). Voltage 220..240 V, 50..60 Hz. Power factor cosφ: >0,95. Circuit load capacity: 25 (B10), 40 (B16), 39 (C10), 62 (C16). Operating temperature range: 5 ÷ 30° C. Protection degree: IP65. Impact resistant: IK08. Protection against electric shock: I. Photobiological risk class (IEC/EN 62471): RG0.
CE
LED
E
kl.I
IP65
IK08
indoor
nie_dom
cri-v80
electronic-equipment
supply-voltage
SDCM-3
lifetime-100000-L80-B10

Downloads

Projects

Any questions? Send us a message

Contact us